AudioRoundTable.com: Pi Speakers » Conical horn for 15" driver

Home » Sponsored » Pi Speakers » Conical horn for 15" driver

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: hornresp question [message #45781 is a reply to message #45780]

Wed, 10 November 2004 21:26

Wayne Parham
Messages: 18783
Registered: January 2001

Illuminati (33rd Degree)

I think you'll really like 'em. Efficiency will be highest down low, but cone flex modes will add energy above 500Hz. You can crossover below that if you want to run them in their pistonic range, or you can go with a driver that is well-behaved through the midrange and move the crossover up, making it a wide-range system.

Report message to a moderator

[Message index]

		Conical horn for 15" driver By: jlharden on Fri, 05 November 2004 18:09
		Re: Conical horn for 15" driver By: Wayne Parham on Fri, 05 November 2004 23:43
		hornresp question By: jlharden on Mon, 08 November 2004 14:50
		Re: hornresp question By: Wayne Parham on Mon, 08 November 2004 16:12
		Re: hornresp question By: jlharden on Wed, 10 November 2004 15:07
		Re: hornresp question By: Wayne Parham on Wed, 10 November 2004 21:26
		Re: hornresp question By: ronco on Sat, 20 November 2004 21:14
		12" or 15" midhorn By: Wayne Parham on Sun, 21 November 2004 00:25

Previous Topic:	bi=amp studio 2's
Next Topic:	Question for Wayne

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 09 19:19:41 CST 2024