AudioRoundTable.com: Pi Speakers » Studio 2 Port info?

Home » Sponsored » Pi Speakers » Studio 2 Port info?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Studio 2 Port info [message #45555 is a reply to message #45554]

Wed, 13 October 2004 10:31

Wayne Parham
Messages: 18787
Registered: January 2001

Illuminati (33rd Degree)

The total length of the port should be 1.875" from edge to edge. If your baffle is 1.5", then I'd probably glue another 0.375" thick panel in the area that the port will be and drill a 2" hole through it. Maybe use a 2.5" x 2.5" square that's 0.375" thick or something like that. The hole drilled through the baffle and the extra piece will give you an overall port length of 1.875".

Report message to a moderator

[Message index]

		Studio 2 Port info? By: crazychile on Tue, 12 October 2004 09:54
		Re: Studio 2 Port info? By: Wayne Parham on Tue, 12 October 2004 11:55
		Re: Studio 2 Port info? By: crazychile on Tue, 12 October 2004 15:03
		Re: Studio 2 Port info? By: GarMan on Tue, 12 October 2004 16:29
		Re: Studio 2 Port info? By: Wayne Parham on Tue, 12 October 2004 17:51
		Re: Studio 2 Port info? By: crazychile on Wed, 13 October 2004 05:05
		Re: Studio 2 Port info By: Wayne Parham on Wed, 13 October 2004 10:31
		Re: Studio 2 Port info? By: GarMan on Tue, 12 October 2004 13:21

Previous Topic:	Pi center channel speaker
Next Topic:	Corner pi speakers

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 23 17:59:25 CST 2024