AudioRoundTable.com: Pi Speakers » Qustions regarding midrange horn.

Home » Sponsored » Pi Speakers » Qustions regarding midrange horn.

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Qustions regarding midrange horn. [message #45032 is a reply to message #45026]

Wed, 21 July 2004 16:48

Wayne Parham
Messages: 18787
Registered: January 2001

Illuminati (33rd Degree)

Oh, I see now. Build-up discussions are probably best left to the cabinetmakers. But I think most people are using butt joints on the sides, and using a cut angle of (90 - (flare angle) / 2) on each joint to the baffle mounting plate. Maybe of the people who have built them will chime in and say how they're doing it.

Report message to a moderator

[Message index]

		Qustions regarding midrange horn. By: Frode on Mon, 19 July 2004 10:16
		Re: Qustions regarding midrange horn. By: Wayne Parham on Mon, 19 July 2004 16:31
		Re: Qustions regarding midrange horn. By: kupfer_m on Wed, 21 July 2004 04:39
		Re: Qustions regarding midrange horn. By: Wayne Parham on Wed, 21 July 2004 05:18
		Re: Qustions regarding midrange horn. By: kupfer_m on Wed, 21 July 2004 10:48
		Re: Qustions regarding midrange horn. By: Wayne Parham on Wed, 21 July 2004 16:48

Previous Topic:	4 PI Theater Plans
Next Topic:	Pi 2 Towers: How Careful Do I Have to Be?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Nov 26 11:42:44 CST 2024