AudioRoundTable.com: Pi Speakers » the problem is tougher than I thought!!

Home » Sponsored » Pi Speakers » the problem is tougher than I thought!!

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

the problem is tougher than I thought!! [message #44941]

Mon, 12 July 2004 18:37

EZ_Angus
Messages: 24
Registered: May 2009

Chancellor

on my altec-pi's, I was gonna jigsaw out a hole and surface mount my 416's. however, the back of the flange has a ton of little fins on it, so no way no how. I guess I gotta mount them on the inside of the baffle? that just seems so wrong to me. any advice on what size to cut the hole relative to the speaks? (i.e. just enough for cone and surround to show through?) This definitely means router, doesn't it? also, should I use the router to flare out the opening a little bit? jeez, this is making me nervous. I have the boxes all glued up except for the front panel where i need to mount the driver and attach the port. Kevin/EZ

Report message to a moderator

[Message index]

		the problem is tougher than I thought!! By: EZ_Angus on Mon, 12 July 2004 18:37
		Which 416s do you have? By: wunhuanglo on Mon, 12 July 2004 19:29
		Re: Which 416s do you have? By: EZ_Angus on Mon, 12 July 2004 21:22
		Re: Which 416s do you have? By: wunhuanglo on Mon, 12 July 2004 23:15
		Re: the problem is tougher than I thought!! By: GM on Tue, 13 July 2004 00:28
		Re: the problem is tougher than I thought!! By: EZ_Angus on Tue, 13 July 2004 07:49
		Re: the problem is tougher than I thought!! By: GM on Tue, 13 July 2004 10:08

Previous Topic:	The Kits
Next Topic:	Looking for veneer tips for my Pis

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 27 03:45:23 CST 2024