Home » Sponsored » Pi Speakers » Cornerhorns without Cornerhorns.
Re: Cornerhorns without Cornerhorns. [message #44446 is a reply to message #44445] Thu, 22 April 2004 14:07 Go to previous messageGo to previous message
Bill Wassilak is currently offline  Bill Wassilak
Messages: 402
Registered: May 2009
Illuminati (1st Degree)
Wayne can probably anser it better, but I don't see why not. The only thing that may suffer is your mid frequencies. 400+ Hz dosen't like going around corners to much, so you'd need some sort of midrange and/or other smaller speaker crossed over that's pointing directly in the room to help fill in the mids+highs.

On my system I'm running 1 old Cerwin-Vega 317P Hardrocker, which is a 15" reflex loaded enclosure, but the port fires out the back into the corner, on top of that I'm bi-amping to a an old pair of Marantz 10" 3-way's. Everything balances out pretty good, it's somewhat hard to tell where the lows are coming from because of the corner loading and the 100Hz/12db octave x-over on them.

So turn one of your speakers in the corner give it a listen see what you think. That's half the fun of doing this hobbie, experimenting.

HTH
Bill W.


 
Read Message
Read Message
Read Message
Previous Topic: A few questions from a non DIY guy.
Next Topic: studio 2 towers
Goto Forum:
  


Current Time: Sat Oct 05 09:14:41 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest