AudioRoundTable.com: Pi Speakers » Passive Line Level Compensation Network?

Home » Sponsored » Pi Speakers » Passive Line Level Compensation Network?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Passive Line Level Compensation Network? [message #44115 is a reply to message #44112]

Wed, 03 March 2004 16:29

Wayne Parham
Messages: 18723
Registered: January 2001

Illuminati (33rd Degree)

Use Spice to analyze and model your R1/R2/C1 network to make the response curve shown below. Start off with values for R1, R2 and C1 having reactive impedance that is proportional to values in the low-impedance (speaker output level) crossover, but scale them 1000-times or so to more closely match the impedance of your preamp circuit. Then fine tune the values of R1, R2 and C1 until you obtain the response curve you want.

Top octave compensation response curve

Report message to a moderator

[Message index]

		Passive Line Level Compensation Network? By: GarMan on Mon, 01 March 2004 09:01
		Re: Passive Line Level Compensation Network? By: Wayne Parham on Mon, 01 March 2004 16:26
		Re: Passive Line Level Compensation Network? By: GarMan on Mon, 01 March 2004 19:19
		Re: Passive Line Level Compensation Network? By: Wayne Parham on Tue, 02 March 2004 01:42
		Re: Passive Line Level Compensation Network? By: Adrian Mack on Tue, 02 March 2004 03:44
		Re: Passive Line Level Compensation Network? By: GarMan on Tue, 02 March 2004 07:27
		Re: Passive Line Level Compensation Network? By: Wayne Parham on Tue, 02 March 2004 16:23
		Re: Passive Line Level Compensation Network? By: billfort on Wed, 03 March 2004 09:55
		Re: Passive Line Level Compensation Network? By: Wayne Parham on Wed, 03 March 2004 16:29

Previous Topic:	are Beyma Pro drivers any good for Hi-Fi? Comparable to JBL's?
Next Topic:	CrossOver questions on 4 Pi

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Jul 13 09:13:01 CDT 2024