Home » Sponsored » Pi Speakers » HF horn dimentions and low end cut-off
Re: HF horn dimentions and low end cut-off [message #43906 is a reply to message #43902] Tue, 10 February 2004 15:59 Go to previous messageGo to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18726
Registered: January 2001
Illuminati (33rd Degree)
The performance of an HF horn at low frequencies is very dependent on the space it is used in. Actually, all horns are for that matter. An HF horn that is baffle mounted will generally have smoother response than freespace in the octave above its lower cutoff, particularly if the horn is physically small. And beyond that, the shape of the horn has an impact on its performance at frequency extremes. The throat is most important up high and the mouth is more important down low. So there is some room for interpretation, and particularly in the first octave.

 
Read Message
Read Message
Read Message
Read Message
Previous Topic: 2pi towers
Next Topic: 2pi tower pics
Goto Forum:
  


Current Time: Mon Jul 15 15:48:54 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest