AudioRoundTable.com: Pi Speakers » Used JBL 2426J in PI?

Home » Sponsored » Pi Speakers » Used JBL 2426J in PI?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 16 ohm vs 8 ohm drivers [message #43681 is a reply to message #43677]

Thu, 15 January 2004 21:25

GarMan
Messages: 960
Registered: May 2009

Illuminati (2nd Degree)

Wayne, I did a search under the H.Eff Speaker forum at the "other place" and found your post about 8 ohm vs 16 ohm speakers, and the need to match the impedence tap of the output transformer for maximum power transfer. Seems to make sense.

However, my question now is, if the two drivers in a 2-way are connected in parallel, wouldn't you need two 16 ohm drivers to build an 8 ohm speaker?

Gar.

Report message to a moderator

[Message index]

		Used JBL 2426J in PI? By: GarMan on Thu, 15 January 2004 11:10
		Also want to know about 2370A Flare By: GarMan on Thu, 15 January 2004 12:24
		Re: Also want to know about 2370A Flare By: Wayne Parham on Thu, 15 January 2004 14:58
		16 ohm vs 8 ohm drivers By: GarMan on Thu, 15 January 2004 15:26
		Re: 16 ohm vs 8 ohm drivers By: Wayne Parham on Thu, 15 January 2004 16:38
		Re: 16 ohm vs 8 ohm drivers By: GarMan on Thu, 15 January 2004 21:25
		Re: 16 ohm vs 8 ohm drivers By: Wayne Parham on Thu, 15 January 2004 21:58

Previous Topic:	No more games
Next Topic:	R-13 placement

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Jul 13 21:03:56 CDT 2024