Home » Sponsored » Pi Speakers » Conical horn pics
Measurements and Impressions [message #43301 is a reply to message #43292] Mon, 08 December 2003 23:21 Go to previous messageGo to previous message
Adrian Mack is currently offline  Adrian Mack
Messages: 568
Registered: May 2009
Illuminati (1st Degree)
Today was a lot of testing, and A/B listening tests between the conical and tractrix horns of mine.

Fired up the conical, and took a few freq response measurements with SW. I had to add a filler block in front of the cone to displace ~30cm^2. Its +/- 3db from 500Hz to 1.6Khz. Not bad! Below 500, theres the dip and then the peak at the conical horns cutoff. The peak is actually flat with the rest of the response, but I'm crossing at 500Hz anyway to the 2225 for

 
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: I need some help on selecting a Pi speaker
Next Topic: Eight months in the making and still not done, but:
Goto Forum:
  


Current Time: Thu Nov 28 06:55:45 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest