AudioRoundTable.com: Pi Speakers » help: pi alignmemt for JBL E155 (box & port)

Home » Sponsored » Pi Speakers » help: pi alignmemt for JBL E155 (box & port)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: help: pi alignmemt for JBL E155 (box & port) [message #43264 is a reply to message #43261]

Thu, 04 December 2003 16:15

Wayne Parham
Messages: 18783
Registered: January 2001

Illuminati (33rd Degree)

These drivers are really tuned for high-output output above 40Hz. They can be used below this frequency, but they aren't designed with specs that make them well-suited for operation in the 20Hz - 40Hz octave. Looks for drivers with more moving mass and a little bit higher Q.

Report message to a moderator

[Message index]

		help: pi alignmemt for JBL E155 (box & port) By: xsheya@yahoo.com on Wed, 03 December 2003 07:53
		Re: tune to 30Hz, if it possible (NT) By: xsheya@yahoo.com on Wed, 03 December 2003 07:58
		Re: help: pi alignmemt for JBL E155 (box & port) By: Wayne Parham on Wed, 03 December 2003 17:08
		Re: help: pi alignmemt for JBL E155 (box & port) By: xsheya@yahoo.com on Thu, 04 December 2003 07:01
		Re: help: pi alignmemt for JBL E155 (box & port) By: Wayne Parham on Thu, 04 December 2003 16:15
		Re: Thanks Wayne!! By: xsheya@yahoo.com on Fri, 05 December 2003 06:32

Previous Topic:	Need one JBL2227HPL and an box advice
Next Topic:	Question on Theater 4 Dimensions

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 15 04:18:07 CST 2024