AudioRoundTable.com: Pi Speakers » Woodfinishing experts...seeking advice

Home » Sponsored » Pi Speakers » Woodfinishing experts...seeking advice

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Woodfinishing experts...seeking advice [message #43101 is a reply to message #43099]

Wed, 19 November 2003 11:55

Matts
Messages: 359
Registered: May 2009

Grand Master

My best advice is....test strips. Keep scraps of wood from construction and test finishes on them. I made Baltic Birch cabs and it didn't take stain very well. I used "Tried & True" products- few coats of its "Linseed Oil and varnish" product, with its "Linseed Oil and Beeswax" as a final coat, and they look very nice and are aging nicely. These products are very good, but I imagine other good oil finishes would look similar.

Report message to a moderator

[Message index]

		Woodfinishing experts...seeking advice By: jlharden on Wed, 19 November 2003 11:24
		Re: Woodfinishing experts...seeking advice By: Matts on Wed, 19 November 2003 11:55
		Re: Woodfinishing experts...seeking advice By: Tightwad on Wed, 19 November 2003 15:26
		Re: Water Base By: Bill Martinelli on Wed, 19 November 2003 16:35
		Re: Water Base By: jlharden on Thu, 20 November 2003 09:37
		Re:Olive Oil By: BillEpstein on Thu, 20 November 2003 12:41
		Re:Olive Oil By: Manualblock on Thu, 20 November 2003 13:28
		Re:Olive Oil By: Matts on Thu, 20 November 2003 14:51
		Re:only extra virginia By: Bill Martinelli on Thu, 20 November 2003 19:48
		Re: Water Base By: Bill Martinelli on Thu, 20 November 2003 19:47
		Re: Woodfinishing experts...seeking advice By: Manualblock on Wed, 19 November 2003 17:24
		Re: Woodfinishing experts...seeking advice By: Bill Martinelli on Wed, 19 November 2003 18:15

Previous Topic:	box design/plans for JBL 2226
Next Topic:	Journal of a First-time Builder - Pt 4: Functioning Speakers x2!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Feb 19 19:12:07 CST 2025