AudioRoundTable.com: Pi Speakers » Field coil speaker replacement advice...

Home » Sponsored » Pi Speakers » Field coil speaker replacement advice...

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Field coil speaker replacement advice... [message #42893]

Tue, 04 November 2003 07:12

Neo
Messages: 33
Registered: May 2009

Baron

I'm restoring an old 1950's I think floor standing Philco radio. It's got a field-coil speaker and the voice coil is rubbing. The field-coil seems good, so I thought I'd keep that, but replace the 12" speaker. The VC resistance measures about 5 ohms. For those of you unfamiliar with a field-coil speaker, the power supply choke is used for the speaker magnet - there is no permanent speaker magnet.

Any thoughts? Would an 8 ohm Eminance 12" work. I though I'd try my Theater Pi 4's tonight to see if they work.

Thanks,
Tom

Report message to a moderator

[Message index]

		Field coil speaker replacement advice... By: Neo on Tue, 04 November 2003 07:12
		Re: Field coil speaker replacement advice... By: AstroSonic on Tue, 04 November 2003 09:55
		Thanks for the info... By: Neo on Tue, 04 November 2003 10:11
		Re: Field coil speaker replacement advice... By: Wayne Parham on Tue, 04 November 2003 22:02
		Re: Field coil speaker replacement advice... By: Neo on Wed, 05 November 2003 03:42
		Re: Field coil speaker replacement advice... By: Wayne Parham on Wed, 05 November 2003 04:14

Previous Topic:	Any experience alpha 15 or another for open baffle ????
Next Topic:	Journal of a First-time Builder - Pt 1: Assembly

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 29 18:30:35 CST 2024