AudioRoundTable.com: Pi Speakers » Anyone who could model new 18db/oct High Pass @950Hz?

Home » Sponsored » Pi Speakers » Anyone who could model new 18db/oct High Pass @950Hz?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 210ti unsuitable for 2 ways? [message #42526 is a reply to message #42525]

Fri, 19 September 2003 06:21

Sam P.
Messages: 307
Registered: May 2009

Grand Master

what part of "minimum recommended crossover frequency 2000Hz./12dB octave" is unclear?
I would imagine results at 950 Hz. WOULD suck. This driver has a huge z peak at 2 kHz., and a 4 dB rise from 2 kHz. to 4 or 5kHz. shown on the PE site's spec sheet. Looked decent at first glance for use in a 3 way system, although I did not look closely at the upper end response. Not sure what advantage they would have over the venerable psd-2002 in this price range:) Sam

8 ohm, 3rd order HP, the online calculator showed 14uF series input cap, 1.0 mH shunt inductor, and 42uF series output cap to the lpad/driver for a desired Fc of 950Hz, btw.

Report message to a moderator

[Message index]

		Anyone who could model new 18db/oct High Pass @950Hz? By: -3db on Thu, 18 September 2003 11:40
		Spice By: Wayne Parham on Thu, 18 September 2003 12:49
		Re: LCL is NOT a hp configuration By: Sam P. on Fri, 19 September 2003 05:49
		Re: 210ti unsuitable for 2 ways? By: Sam P. on Fri, 19 September 2003 06:21
		Need a pair of PSD2002's By: LuxmanLover on Fri, 19 September 2003 15:57

Previous Topic:	we're still here, and partying our
Next Topic:	Audiophile Posters

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 29 10:29:02 CST 2024