AudioRoundTable.com: Pi Speakers » Anyone who could model new 18db/oct High Pass @950Hz?

Home » Sponsored » Pi Speakers » Anyone who could model new 18db/oct High Pass @950Hz?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Spice [message #42521 is a reply to message #42519]

Thu, 18 September 2003 12:49

Wayne Parham
Messages: 18790
Registered: January 2001

Illuminati (33rd Degree)

Check the circuit in Spice, and don't forget to accurately model the source and load impedance, including reactance. This is very important in speaker circuits, because the load is usually nearly as reactive as the parts in the crossover.

There are some sample crossover circuits in the archive above, so you can see how to use the program. You'll be able to simply edit the files to make your circuit model.

Wayne

Report message to a moderator

[Message index]

		Anyone who could model new 18db/oct High Pass @950Hz? By: -3db on Thu, 18 September 2003 11:40
		Spice By: Wayne Parham on Thu, 18 September 2003 12:49
		Re: LCL is NOT a hp configuration By: Sam P. on Fri, 19 September 2003 05:49
		Re: 210ti unsuitable for 2 ways? By: Sam P. on Fri, 19 September 2003 06:21
		Need a pair of PSD2002's By: LuxmanLover on Fri, 19 September 2003 15:57

Previous Topic:	we're still here, and partying our
Next Topic:	Audiophile Posters

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 29 10:31:34 CST 2024