AudioRoundTable.com: Pi Speakers » because this forum is good,il post here

Home » Sponsored » Pi Speakers » because this forum is good,il post here

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Persistence, my friend [message #42212 is a reply to message #42211]

Mon, 18 August 2003 02:54

Wayne Parham
Messages: 18786
Registered: January 2001

Illuminati (33rd Degree)

You have a good start with good components, so I think it will sound nice when everything is setup properly. JBL 2226's aren't designed to be subwoofers, but they are truly excellent from about 40Hz up. You can tune lower, like with an EBS alignment, but naturally with reduced output on the VLF shelf. What size cabinet are you using and what size port? What's the Helmholtz frequency?

Report message to a moderator

[Message index]

		because this forum is good,il post here By: toxicport.e on Sat, 16 August 2003 18:09
		Clipping By: Wayne Parham on Sat, 16 August 2003 18:52
		Re: Clipping By: toxicport.e on Sun, 17 August 2003 01:38
		Re: Clipping By: Anonymous on Sun, 17 August 2003 17:19
		2226h set up, its not the best.. By: toxicport.e on Mon, 18 August 2003 01:23
		Persistence, my friend By: Wayne Parham on Mon, 18 August 2003 02:54
		phew By: toxicport.e on Mon, 18 August 2003 19:33
		Re: phew By: Wayne Parham on Mon, 18 August 2003 22:43
		First : clean source then il comment more :) By: toxicport.e on Tue, 19 August 2003 17:13
		Re: 2226h set up, its not the best.. By: ToFo on Mon, 18 August 2003 12:05
		Re: 2226h set up, its not the best.. By: toxicport.e on Fri, 22 August 2003 18:51
		Clipping with Phil Lesh and Bonn Scott. By: Scholl on Tue, 19 August 2003 07:29
		Re: Clipping with Phil Lesh and Bonn Scott. By: toxicport.e on Tue, 19 August 2003 17:41
		Re: Clipping with Phil Lesh and Bonn Scott. By: Scholl on Wed, 20 August 2003 03:12

Previous Topic:	How do you tell when a horn "unloads"?
Next Topic:	Aluminium vs plastic horns, third-order vs fourth-order crossovers...

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Nov 25 09:42:11 CST 2024