AudioRoundTable.com: Pi Speakers » Adjusting the capacitor value on the tweeter attenuator

Home » Sponsored » Pi Speakers » Adjusting the capacitor value on the tweeter attenuator

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Adjusting the capacitor value on the tweeter attenuator [message #42210 is a reply to message #42207]

Sun, 17 August 2003 22:08

Wayne Parham
Messages: 18835
Registered: January 2001

Illuminati (33rd Degree)

Your circuit is wired correctly, except that the stock cable uses 0.47uF for C1. But as you've noticed, the difference is pretty slight between C1 values of 0.33uF and 0.47uF in a circuit having these particular values of R1 and R2.

Report message to a moderator

[Message index]

		Adjusting the capacitor value on the tweeter attenuator By: Jerry Parker on Sat, 16 August 2003 11:23
		Re: Adjusting the capacitor value on the tweeter attenuator By: Wayne Parham on Sat, 16 August 2003 14:50
		Re: Adjusting the capacitor value on the tweeter attenuator By: Jerry Parker on Sun, 17 August 2003 10:38
		Re: Adjusting the capacitor value on the tweeter attenuator By: Wayne Parham on Sun, 17 August 2003 11:18
		Re: Adjusting the capacitor value on the tweeter attenuator By: Jerry Parker on Sun, 17 August 2003 12:16
		Re: Adjusting the capacitor value on the tweeter attenuator By: Wayne Parham on Sun, 17 August 2003 22:06
		Re: Adjusting the capacitor value on the tweeter attenuator By: Jerry Parker on Tue, 19 August 2003 09:43
		Re: Adjusting the capacitor value on the tweeter attenuator By: Wayne Parham on Tue, 19 August 2003 12:42
		Re: Adjusting the capacitor value on the tweeter attenuator By: Jerry Parker on Sun, 17 August 2003 13:37
		Re: Adjusting the capacitor value on the tweeter attenuator By: Wayne Parham on Sun, 17 August 2003 22:08

Previous Topic:	Who powered up all their amps at once?
Next Topic:	10 Pi horn as an electric bass cabinet

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Feb 18 05:57:09 CST 2025