Home » Sponsored » Pi Speakers » Adjusting the capacitor value on the tweeter attenuator
Re: Adjusting the capacitor value on the tweeter attenuator [message #42204 is a reply to message #42197] Sun, 17 August 2003 10:38 Go to previous messageGo to previous message
Jerry Parker is currently offline  Jerry Parker
Messages: 58
Registered: May 2009
Baron
Well, completely shorting the capacitor out of the loop, gives a 4dB increase in SPL according to my radioshack spl meter at around 2500hz. And I can definatly hear that. But disconnecting and reconnecting the .33mfd film and foil capacitor (or even the original .47mfd) does nothing at the same frequency of 2500hz. I would assume that it would be attenuating by around 10 to 12dB at this frequency, but it isnt doing anything? The thing is, it sounds relativly flat up to around 16khz or so even without the cap...
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Who powered up all their amps at once?
Next Topic: 10 Pi horn as an electric bass cabinet
Goto Forum:
  


Current Time: Wed Sep 11 21:18:02 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest