AudioRoundTable.com: Pi Speakers » Attenuator cap in crossover question

Home » Sponsored » Pi Speakers » Attenuator cap in crossover question

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: And [message #42072 is a reply to message #42070]

Thu, 31 July 2003 20:21

Bill Martinelli
Messages: 677
Registered: May 2009

Illuminati (1st Degree)

What's wrong with a proposition? You could use a switch to switch in or out an added cap when you need. Since you have .1 's, you might consider using two of them in parallel permanently wired so you have .2uF. Then have another pair switched. This would give you the option of a .2uF or .4uF bypass cap. Now if you really wanted to get "wild" (adjective) you could secretly replace all the resisters in an attenuator switch with caps and ..... have a variable switchathon for a bypass cap. Maybe a JBL driver would sound smoother than the Altec.

other bill

Report message to a moderator

[Message index]

		Attenuator cap in crossover question By: BillEpstein on Thu, 31 July 2003 18:31
		Re: And By: Bill Martinelli on Thu, 31 July 2003 20:21
		Compensation cable assemblies - R1, R2 and C1 By: Wayne Parham on Thu, 31 July 2003 23:26
		Re: Attenuator cap in crossover question By: AstroSonic on Fri, 01 August 2003 07:58

Previous Topic:	basshorn
Next Topic:	theater 4Pi vs stage 4Pi

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 30 22:22:21 CST 2024