| Madison Knight 10" in SpeakerBox says 366L right? [message #41908] |
Sat, 12 July 2003 18:10  |
-3db
Messages: 7
Registered: May 2009
|
Esquire |
|
|
I am about to cut wood, and I am a little stuck with PiAlign.
I assume I have to use a pre-set speaker name, and the associated file in order to run PiAlign. Is this right. I've taken the T/S from Madison's site for the Knight 10", and this is what I get:
Qts=.578
Qes=.599
BL=13.89
Re=10.4
Xmax =4mm
eff=95db/1w
200w
I'm not sure if this is all, but the reflex box comes out at 366L, 36hz
So, I'm xover at 90 hz to subs, so I think I am going to take the 260L aperiodic options.
'does any of this sound correct.
Thanks for your help to a newbie.
Sincerely,
-3db
too big
|
|
|
|
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
