AudioRoundTable.com: Pi Speakers » PSD 2002 modifications

Home » Sponsored » Pi Speakers » PSD 2002 modifications

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

rear chamber access [message #41881 is a reply to message #41879]

Thu, 10 July 2003 18:01

ToFo
Messages: 219
Registered: May 2009

Master

Adam,
I have been wanting to experiment here as well. I assume from looking at the diaphragms (and the sturdy glue around the surround) that the only rear chamber access is to carefully cut off the back cap, leaving enough cylinder to attach the new chamber. If you know, or discover a cleaner and easier method, please ellaborate. (not that it would be bad that way, just pondering the best approach)
Thanks,
Thomas F.

Report message to a moderator

[Message index]

		PSD 2002 modifications By: Adam on Thu, 10 July 2003 08:24
		Re: PSD 2002 modifications By: Wayne Parham on Thu, 10 July 2003 09:50
		Huh? By: mollecon on Thu, 10 July 2003 10:06
		Ferrofluid By: Wayne Parham on Thu, 10 July 2003 10:50
		Thx Wayne By: mollecon on Thu, 10 July 2003 16:57
		Re: PSD 2002 modifications By: Adam on Thu, 10 July 2003 10:46
		Reply from Eminence By: Adam on Thu, 10 July 2003 16:37
		rear chamber access By: ToFo on Thu, 10 July 2003 18:01
		Re: rear chamber access By: Adam on Thu, 10 July 2003 18:54
		and a good thought at that. By: ToFo on Thu, 10 July 2003 20:53
		Re: and a good thought at that. By: Adam on Thu, 10 July 2003 22:38
		Sorry, but I'm going to hang on to them... By: ToFo on Thu, 10 July 2003 22:55
		Re: Sorry, but I'm going to hang on to them... By: Adam on Fri, 11 July 2003 08:55
		Measurements By: Wayne Parham on Thu, 10 July 2003 22:11
		Re: Measurements By: Adam on Thu, 10 July 2003 22:38
		Re: Mic for Measurements By: wunhuanglo on Fri, 11 July 2003 03:07
		Re: Mic for Measurements By: Chris R on Sat, 12 July 2003 09:34
		Re: Mic for Measurements - SORRY! By: wunhuanglo on Sat, 12 July 2003 19:41

Previous Topic:	super tweeter for Pi 4 T
Next Topic:	JBL2226H+MAC40s+large room=Kick ass

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Sep 16 19:29:36 CDT 2024