Home » Sponsored » Pi Speakers » Diffraction and Baffle Spacing - critic this design?
Re: Diffraction and Baffle Spacing - critic this design? [message #41833 is a reply to message #41829] Tue, 08 July 2003 06:49 Go to previous messageGo to previous message
Bill Martinelli is currently offline  Bill Martinelli
Messages: 677
Registered: May 2009
Illuminati (1st Degree)

I'm with Sam. Shorten the cabinet so the total height 44"-46" for a tall cabinet. Run the midrange up 2K. This will elimate any peaking at lower frequencies in the 2370. 1" compression drivers sound better above 1600hz. The Alph 6 is not the correct driver if you want "clean and crisp" midrange. It's an ok driver for you application if thats what your modeling things after. Reconing your JBL baskets to a 2235 would be Very nice.

Bill

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: How well does baltic birch finish?
Next Topic: :-)
Goto Forum:
  


Current Time: Sun Sep 08 18:54:35 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest