AudioRoundTable.com: Pi Speakers » How well does baltic birch finish?

Home » Sponsored » Pi Speakers » How well does baltic birch finish?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: How well does baltic birch finish? [message #41752 is a reply to message #41747]

Mon, 30 June 2003 04:19

Matts
Messages: 359
Registered: May 2009

Grand Master

I made some out of birch plywood- I did a test strip with a few stains on it and a natural oil finish. went with the natural oil finish- used a Tried & True linseed oil w/ varnish and topcoat with the beeswax version, and they look great. It's a light-colored finish. The stains looked a little dull and smeared on the test strip, and that's the knock on birch, supposedly. Good luck!

Report message to a moderator

[Message index]

		How well does baltic birch finish? By: massappeal129 on Sun, 29 June 2003 14:35
		Re: How well does baltic birch finish? By: Matts on Mon, 30 June 2003 04:19
		Re: Natural with Varnish for a warm look By: Bill Martinelli on Mon, 30 June 2003 08:04
		Re: How well does baltic birch finish? By: garyhope on Wed, 09 July 2003 12:27

Previous Topic:	Crossover values for Drivers with different Impedance??
Next Topic:	Diffraction and Baffle Spacing - critic this design?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Aug 02 14:17:55 CDT 2024