AudioRoundTable.com: Pi Speakers » triamp Q for Wayne

Home » Sponsored » Pi Speakers » triamp Q for Wayne

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Proper horn for 902/500Hz Xover [message #41649 is a reply to message #41643]

Tue, 17 June 2003 14:36

Tom Brennan
Messages: 32
Registered: May 2009

Baron

Astro---The 511B works and sounds fine used down to 500. In fact IMO it's the 2nd best horn I've ever used and I've used lots of them: Edgars, EVs, JBLs, Martinellis, McCauleys, PAudios. The best sounding horns I've used were tarfilled Altec multicells, 1005s.

So yeah, damp the 511s and use them and forget about it, you'll be done, only one thing sounds better than a 902 on a 511 - a 288 on a 1005. :-)

Report message to a moderator

[Message index]

		triamp Q for Wayne By: Sam P. on Mon, 16 June 2003 06:41
		511's in a three-way By: Wayne Parham on Mon, 16 June 2003 10:37
		Re: 902 crossover point By: wunhuanglo on Mon, 16 June 2003 16:51
		Re: 902 crossover point By: Wayne Parham on Mon, 16 June 2003 18:04
		Re: 902 crossover point By: AstroSonic on Mon, 16 June 2003 19:09
		Re: 902 crossover point By: Tom Brennan on Mon, 16 June 2003 20:58
		Re: Proper horn for 902/500Hz Xover By: AstroSonic on Tue, 17 June 2003 04:35
		Re: Proper horn for 902/500Hz Xover By: Tom Brennan on Tue, 17 June 2003 14:36
		Matching directivity By: ToFo on Tue, 17 June 2003 08:31

Previous Topic:	Concern frequency response 16Khz?
Next Topic:	wedge for corner horns

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Jul 31 09:23:54 CDT 2024