AudioRoundTable.com: Pi Speakers » Need an educated guess from someone more knowledgable:

Home » Sponsored » Pi Speakers » Need an educated guess from someone more knowledgable:

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

π cornerhorn using TAD 1602 [message #41543 is a reply to message #41541]

Wed, 04 June 2003 14:45

Wayne Parham
Messages: 18738
Registered: January 2001

Illuminati (33rd Degree)

If you go any bigger than 4ft3 with the TAD 1602, you'll need to make an EBS alignment. That's a good option - especially for a subwoofer - but it does mean your output below 100Hz is generated at reduced levels, in a reduced "shelf." That's why the alignment has the name - the response is extended but at a reduced "shelf."

I suggest using a π cornerhorn configuration, which generates prodigious bass using a motor chamber of 3.85ft3 tuned to 38Hz.

Report message to a moderator

[Message index]

		Need an educated guess from someone more knowledgable: By: Garland on Tue, 03 June 2003 10:36
		Tiny speakers By: Wayne Parham on Tue, 03 June 2003 12:30
		Re: Tiny speakers By: Garland on Tue, 03 June 2003 16:30
		Build a pair of One Pi's! By: brian.goodman on Wed, 04 June 2003 06:31
		Re: Tiny speakers By: DRC on Wed, 04 June 2003 11:48
		Great, now I'm talking to myself . . . . . By: DRC on Wed, 04 June 2003 12:41
		π cornerhorn using TAD 1602 By: Wayne Parham on Wed, 04 June 2003 14:45
		Dave, you still at the AOL or back at triode? nt By: Garland on Wed, 04 June 2003 16:00
		Back at Triode (n/t) By: DRC on Thu, 05 June 2003 11:42
		Mazal tov By: RJeff on Thu, 05 June 2003 10:14

Previous Topic:	New Speaker with Deltalite
Next Topic:	Help pleaaase!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Aug 01 06:13:37 CDT 2024