AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Eminence horn

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: pull the h290's [message #41461 is a reply to message #41460]

Fri, 23 May 2003 05:36

LuxmanLover
Messages: 164
Registered: May 2009

Master

Hey Sam....
I've read the reference to the Eminence have more extention on the top end many times on the Pi forum yet when comparing at least the published specs it appears the 2421 actually goes a little higher? I guess it will be a try it and see deal. As far as using the H290 horn it's just a matter of using the parts I have on hand. I do have a set of 2345's which can play down to 800Hz but they are much larger than the H290, not a big deal in itself , it's just that they won't the present cabints. You know how this hobby works, anyway I'll post my impressions after I do some experimenting.
THX Kelly

Report message to a moderator

[Message index]

		Eminence horn By: LuxmanLover on Thu, 22 May 2003 15:01
		Damping and crossover filter Q By: Wayne Parham on Thu, 22 May 2003 16:15
		Re: Damping and crossover filter Q (or lost in Saskatoon) By: LuxmanLover on Thu, 22 May 2003 16:38
		Use of a horn under Fc By: Wayne Parham on Thu, 22 May 2003 20:53
		Re: pull the h290's By: Sam P. on Fri, 23 May 2003 04:49
		Re: pull the h290's By: LuxmanLover on Fri, 23 May 2003 05:36
		Re: why not x at 1kHz?nt By: Sam P. on Fri, 23 May 2003 08:26
		Re: why not x at 1kHz?nt By: LuxmanLover on Fri, 23 May 2003 14:31
		1kHz crossover values By: Wayne Parham on Fri, 23 May 2003 15:28

Previous Topic:	crossover doc
Next Topic:	JBL vs. Lambda??

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Jul 19 06:27:12 CDT 2024