AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Eminence horn

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Use of a horn under Fc [message #41458 is a reply to message #41457]

Thu, 22 May 2003 20:53

Wayne Parham
Messages: 18727
Registered: January 2001

Illuminati (33rd Degree)

I wouldn't crossover the H290 below 1kHz because the diaphragm will be unloaded at low frequencies. Output under 1kHz will be reduced, distortion will be higher and you could damage the driver. But you can certainly try it - Just be careful with the volume knob.

Report message to a moderator

[Message index]

		Eminence horn By: LuxmanLover on Thu, 22 May 2003 15:01
		Damping and crossover filter Q By: Wayne Parham on Thu, 22 May 2003 16:15
		Re: Damping and crossover filter Q (or lost in Saskatoon) By: LuxmanLover on Thu, 22 May 2003 16:38
		Use of a horn under Fc By: Wayne Parham on Thu, 22 May 2003 20:53
		Re: pull the h290's By: Sam P. on Fri, 23 May 2003 04:49
		Re: pull the h290's By: LuxmanLover on Fri, 23 May 2003 05:36
		Re: why not x at 1kHz?nt By: Sam P. on Fri, 23 May 2003 08:26
		Re: why not x at 1kHz?nt By: LuxmanLover on Fri, 23 May 2003 14:31
		1kHz crossover values By: Wayne Parham on Fri, 23 May 2003 15:28

Previous Topic:	crossover doc
Next Topic:	JBL vs. Lambda??

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Jul 19 06:33:45 CDT 2024