AudioRoundTable.com: Pi Speakers » Baffle spacing, phase angles and time alignment, revisited

Home » Sponsored » Pi Speakers » Baffle spacing, phase angles and time alignment, revisited

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

The $64,000 guestion, how do you determine how much tilt you have?? [message #41386 is a reply to message #41352]

Thu, 15 May 2003 07:25

Robert Hamel
Messages: 93
Registered: May 2009

Viscount

Let's say you get it down to figuring out the delay is phase from the crossover and the actual path length because of the voice coil offsets at crossover or the overlap range where both driver have significant output. My intuition says its simple geometry but how do you do it?? Second question if you know you slopes, I use 24db how much overlap or what frequencies above and below crossover would you be interested in. How do you determine this based on your slopes???

Thanks

Report message to a moderator

[Message index]

		Baffle spacing, phase angles and time alignment, revisited By: Wayne Parham on Tue, 13 May 2003 23:56
		Re: Baffle spacing, phase angles and time alignment, revisited By: spkrman57 on Wed, 14 May 2003 04:22
		Re: Baffle spacing, phase angles and time alignment, revisited By: mikebake on Wed, 14 May 2003 10:28
		Re: Baffle spacing, phase angles and time alignment, revisited By: DRC on Wed, 14 May 2003 04:50
		Re: upward axis shift By: Sam P. on Wed, 14 May 2003 08:21
		Re: upward axis shift By: Wayne Parham on Wed, 14 May 2003 13:06
		Re: Baffle spacing, phase angles and time alignment, revisited By: Robert Hamel on Wed, 14 May 2003 16:34
		The $64,000 guestion, how do you determine how much tilt you have?? By: Robert Hamel on Thu, 15 May 2003 07:25
		Re: The $64,000 guestion, how do you determine how much tilt you have?? By: Wayne Parham on Thu, 15 May 2003 16:44
		Re: Hey BOB By: Sam P. on Fri, 16 May 2003 14:21
		Hello Sam By: Robert Hamel on Sat, 17 May 2003 05:15

Previous Topic:	"The Police", 'LIVE!'
Next Topic:	Power Handling of Pi Crossover

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Jul 20 10:27:26 CDT 2024