AudioRoundTable.com: Pi Speakers » Pi Speakers Crossover SPICE values

Home » Sponsored » Pi Speakers » Pi Speakers Crossover SPICE values

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

One other thing....... [message #41359 is a reply to message #41357]

Wed, 14 May 2003 04:21

Adrian Mack
Messages: 568
Registered: May 2009

Illuminati (1st Degree)

Because the bottom octave is essentially rolled off to augment the top end, does this lower the overall sensitivity of the driver? Or, it it just the attenuation/lpad part of it that will lower sensitivity... ?

Thanks!
Adrian

Report message to a moderator

[Message index]

		Pi Speakers Crossover SPICE values By: Adrian Mack on Tue, 13 May 2003 02:48
		Re: Pi Speakers Crossover SPICE values By: Wayne Parham on Tue, 13 May 2003 03:13
		Re: Pi Speakers Crossover SPICE values By: Adrian Mack on Tue, 13 May 2003 05:55
		Re: Pi Speakers - 1kHz - Crossover SPICE values By: Wayne Parham on Tue, 13 May 2003 12:35
		Re: Pi Speakers - 1kHz - Crossover SPICE values By: Adrian Mack on Wed, 14 May 2003 03:50
		One other thing....... By: Adrian Mack on Wed, 14 May 2003 04:21
		Re: One other thing....... By: Wayne Parham on Wed, 14 May 2003 12:26
		Kewl By: Adrian Mack on Thu, 15 May 2003 06:54

Previous Topic:	Cornerhorns, revisited
Next Topic:	Resistor values to take the 2123 down 6, please

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 29 12:50:59 CST 2024