AudioRoundTable.com: Pi Speakers » Pi Speakers Crossover SPICE values

Home » Sponsored » Pi Speakers » Pi Speakers Crossover SPICE values

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Pi Speakers - 1kHz - Crossover SPICE values [message #41328 is a reply to message #41320]

Tue, 13 May 2003 12:35

Wayne Parham
Messages: 18756
Registered: January 2001

Illuminati (33rd Degree)

Good job! You hit it right on the head with those values for an 8dB network with top-octave compensation. They are measured in ohms, by the way, and not kilohms. Your response curve looks great for use with compression horns. If you want more midband attenuation, just modify the values of R1 and R2 to suit.

Report message to a moderator

[Message index]

		Pi Speakers Crossover SPICE values By: Adrian Mack on Tue, 13 May 2003 02:48
		Re: Pi Speakers Crossover SPICE values By: Wayne Parham on Tue, 13 May 2003 03:13
		Re: Pi Speakers Crossover SPICE values By: Adrian Mack on Tue, 13 May 2003 05:55
		Re: Pi Speakers - 1kHz - Crossover SPICE values By: Wayne Parham on Tue, 13 May 2003 12:35
		Re: Pi Speakers - 1kHz - Crossover SPICE values By: Adrian Mack on Wed, 14 May 2003 03:50
		One other thing....... By: Adrian Mack on Wed, 14 May 2003 04:21
		Re: One other thing....... By: Wayne Parham on Wed, 14 May 2003 12:26
		Kewl By: Adrian Mack on Thu, 15 May 2003 06:54

Previous Topic:	Cornerhorns, revisited
Next Topic:	Resistor values to take the 2123 down 6, please

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Sep 04 13:52:11 CDT 2024