AudioRoundTable.com: Pi Speakers » Could I squeeze a 2pi into this cabinet?

Home » Sponsored » Pi Speakers » Could I squeeze a 2pi into this cabinet?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: My Home Depot has the same sign.... [message #41307 is a reply to message #41306]

Mon, 12 May 2003 10:29

Matts
Messages: 359
Registered: May 2009

Grand Master

and they cut mine no problem. There's another sign that says something like "all cuts over 2 per sheet are $0.25 each." The guy that cut mine was so interested in the speakers he didn't even charge extra for the cuts. I think the "no precision cuts" is just there to protect them if someone tries to get weird with them. As Someone says above, you don't need precision cuts. If it's a little off here and there leave it proud or flush cut it later.

Report message to a moderator

[Message index]

		Could I squeeze a 2pi into this cabinet? By: RJeff on Sun, 11 May 2003 11:25
		Re: Could I squeeze a 2pi into this cabinet? By: Wayne Parham on Sun, 11 May 2003 12:10
		Internal volume By: RJeff on Sun, 11 May 2003 13:10
		one π By: Wayne Parham on Sun, 11 May 2003 13:39
		Re: Could I squeeze a 2pi into this cabinet? By: BillEpstein on Sun, 11 May 2003 17:49
		Not MY home depot By: RJeff on Mon, 12 May 2003 06:05
		Re: My Home Depot has the same sign.... By: Matts on Mon, 12 May 2003 10:29
		Re: My Home Depot has the same sign.... By: Wayne Parham on Mon, 12 May 2003 13:07
		Re: where there's a will, there's a relative By: Juan Epstein on Tue, 13 May 2003 05:03
		What's Wrong With Ryobi By: elektratig on Tue, 13 May 2003 14:43
		Re: Skill saw tricks By: WhoWasILastWeek? on Tue, 13 May 2003 08:16
		Sawboard By: elektratig on Tue, 13 May 2003 14:56
		Re: Sawboard By: JuanEpstein on Wed, 14 May 2003 08:02

Previous Topic:	The Ps (Sam and Wayne) made me do it
Next Topic:	dml-1152mc

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Aug 20 05:02:16 CDT 2025