Home » Sponsored » Pi Speakers » More two way questions...
PiAlign nomenclature [message #41304 is a reply to message #41303] Mon, 12 May 2003 01:43 Go to previous messageGo to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18754
Registered: January 2001
Illuminati (33rd Degree)

Look at the "readme.txt" file in the distribution archive of PiAlign, as it explains what the input values are, and what they mean. There is also a substitution guide contained therein. Basically, you can use Vas for Vad, Fts as Frd and 1/Qts as Qd.

If you carefully examine the suggestions produced by PiAlign, you'll notice a trend. Generally speaking, most PiAligned cabinets are overdamped or what I would call EBS like. They are also often smaller than the box required for deepest flat response. Specifically, woofers having Qts less than about 0.4 are likely to be slightly overdamped and those with Qts greater than 0.4 are likely to be a little underdamped. Woofers with very high Q above about 0.7 tend to produce a curve that is like a shallow EBS.

 
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: MAF photos
Next Topic: The Ps (Sam and Wayne) made me do it
Goto Forum:
  


Current Time: Wed Aug 28 20:11:05 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest