AudioRoundTable.com: Pi Speakers » HF Horn-Woofer phase at crossover

Home » Sponsored » Pi Speakers » HF Horn-Woofer phase at crossover

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re:Radical DeStressing 511B's [message #41195 is a reply to message #41191]

Fri, 02 May 2003 04:27

AstroSonic
Messages: 58
Registered: May 2009

Baron

Hi Sam,

Thanks for the info. I was able to locate Altec AN-9 at the Sound Practices website as you had suggested. The method of achieving acoustic alignment by changing the relative position of the drivers while wired in phase to produce a maximum null at the crossover, then reversing the driver phase (for 2nd order xover) is ingenious.

Now about destressing the 511b's... Just how much sawing/weld removal are we talking about? Just the fins, fins and flare, or the entire horn?

Regards,

AstroSonic

Report message to a moderator

[Message index]

		HF Horn-Woofer phase at crossover By: AstroSonic on Thu, 01 May 2003 08:07
		Re: HF Horn-Woofer phase at crossover By: Sam P. on Thu, 01 May 2003 10:21
		Re: Thanks! By: AstroSonic on Thu, 01 May 2003 15:22
		Re:ringing By: Sam P. on Thu, 01 May 2003 17:00
		Jet-Hot By: Wayne Parham on Thu, 01 May 2003 20:33
		Re:Radical DeStressing 511B's By: AstroSonic on Fri, 02 May 2003 04:27
		Re:go for it! By: Sam P. on Fri, 02 May 2003 05:28
		Re: HF Horn-Woofer phase at crossover By: ToFo on Thu, 01 May 2003 10:26
		Re: HF Horn-Woofer phase at crossover By: Wayne Parham on Thu, 01 May 2003 11:32

Previous Topic:	"B" sides
Next Topic:	Theater 4 Pi + .5mh in woofer circuit... Wayne ?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 27 04:27:53 CST 2024