AudioRoundTable.com: Pi Speakers » Pi design and wooden horns(Edgar & Martinelli)

Home » Sponsored » Pi Speakers » Pi design and wooden horns(Edgar & Martinelli)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

First-order low-pass for speakers [message #41095 is a reply to message #41094]

Sun, 20 April 2003 19:53

Wayne Parham
Messages: 18889
Registered: January 2001

Illuminati (33rd Degree)

You can make a first-order low-pass filter for your 2226's easily enough - Just put a Zobel damper across the woofer and a series coil will then act as a first-order filter. I like to run 'em straight out, using a series coil without a Zobel in a quasi-first-order arrangement, which is basically no crossover at all. But it's no sweat to make a real first-order filter for these woofers if you want it.

Report message to a moderator

[Message index]

		Pi design and wooden horns(Edgar & Martinelli) By: spkrman57 on Sun, 20 April 2003 05:17
		Re: Pi design and wooden horns(Edgar & Martinelli) By: Robert Hamel on Sun, 20 April 2003 06:50
		Re: Pi design and wooden horns(Edgar & Martinelli) By: Wayne Parham on Sun, 20 April 2003 11:43
		Re: Nothing sounds like real wood By: bmar on Sun, 20 April 2003 17:25
		I am born again - a wood convert By: spkrman57 on Sun, 20 April 2003 19:22
		First-order low-pass for speakers By: Wayne Parham on Sun, 20 April 2003 19:53
		Re: First-order low-pass for speakers By: spkrman57 on Mon, 21 April 2003 07:09
		Re: First-order low-pass for speakers By: Wayne Parham on Mon, 21 April 2003 07:57
		Re: The highs, you like By: bmar on Mon, 21 April 2003 08:12
		Re: Pi design and wooden horns(Edgar & Martinelli) By: Tom Brennan on Mon, 21 April 2003 01:50
		Re: Pi design and wooden horns (Edgar & Martinelli) By: Wayne Parham on Mon, 21 April 2003 09:35

Previous Topic:	Motor subenclosure baffle cutout on 10Pi
Next Topic:	1Pi problems

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu May 08 00:21:00 CDT 2025