Home » Sponsored » Pi Speakers » Bmar...can you please explain how to achieve that beautiful finish again?
Re: Fine Chris Craft finish [message #41021 is a reply to message #41017] Wed, 16 April 2003 10:57 Go to previous messageGo to previous message
Dr Jekyll is currently offline  Dr Jekyll
Messages: 3
Registered: May 2009
Esquire
Hey, I like the water filled baggie disposal method for the oil soaked rags. Next time when good speakers go bad, I can just deep six the thing at the curb in a large leaf bag!

do people actually buy purple sandpaper? the horror. Call up Hood Finishing and get a catalogue. They have all types finishes, stains, sandpaper and supplies. you can buy stuff buy the gallon if you don't need drums and pails.

My personal favorite if I'm going to brush a finish on is Varnish. Shellac is fun and dries a LOT faster but the varnish is just so nostalgic. I used to use a lot of Zipguard polyurethane years ago. Never see it and don't even know how long it's been gone. The nice thing about Spar Varnish is its made with Tung oil and a lot of other good components in oils. Its weather resistant and has been used on boats, outdoor woodwork, counters and bar tops for years. I like to use on Coffee/End/Dinning tables, bathroom & cucina woodwork, and especially window sills. Minwax makes a semi gloss Helmsman brand that is easy to get and works great.

I don't think the Helmsman appropriate for the motor yacht,
But I wouldn't use $85 a gallon Spar Varnish on my window sills either.


-dJ


 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Group Delay Calculation Formula
Next Topic: Linn
Goto Forum:
  


Current Time: Thu Nov 28 15:55:03 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest