AudioRoundTable.com: Pi Speakers » tube active xover update

Home » Sponsored » Pi Speakers » tube active xover update

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

do "bottle heads" use 3 wire power cords? [message #40473 is a reply to message #40470]

Sat, 01 March 2003 13:21

Sam P.
Messages: 307
Registered: May 2009

Grand Master

I'm thinking that may be my major trouble, having the green safety wire connected to chassis ground.
I would like to hear from a Foreplay owner about the ground details they used. How are their input jacks ground leads treated? Output jacks grounded to the same point?
I don't recall having a problem driving the adcom with a dynaco pas3, but in reality may never have actually tried the combo of tubes driving sand... Sam

Report message to a moderator

[Message index]

		tube active xover update By: Sam P. on Sat, 01 March 2003 12:27
		Re: tube active xover update By: Wayne Parham on Sat, 01 March 2003 12:46
		do "bottle heads" use 3 wire power cords? By: Sam P. on Sat, 01 March 2003 13:21
		Ground loops By: Wayne Parham on Sat, 01 March 2003 18:40
		TEMPORARILY lifted the green wire from chassis By: Sam P. on Sat, 01 March 2003 20:08
		You found it! By: Wayne Parham on Sat, 01 March 2003 21:04
		heater-cathode hum? By: Sam P. on Sun, 02 March 2003 16:21

Previous Topic:	Diaphram size of compression drivers, does it affect performance?
Next Topic:	Nice quiet jazz night at home tonight!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Dec 04 15:37:30 CST 2024