Home » Sponsored » Pi Speakers » P.Audio SD-450 N on JBL 2370 Bi-Radial Horn with Wayne Parhams compensation circuit
Re: Radial horns [message #40385 is a reply to message #40384] Sun, 23 February 2003 04:57 Go to previous messageGo to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18789
Registered: January 2001
Illuminati (33rd Degree)
The compensation circuit augments the top octave so it is suitable for any purpose where this sort of response curve is desired. Constant directivity horns need this kind of EQ circuit to compensate for the power response of the driver.

Also, don't run the driver too low because even though it may be capable of producing sound, diaphragm excursion goes up as frequency goes down, even if properly horn loaded. Modern compression drivers aren't designed to be used down deep in the midrange band.

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Pi 10 build idea
Next Topic: 10 Pi Plans
Goto Forum:
  


Current Time: Wed Nov 27 19:43:34 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest