AudioRoundTable.com: Pi Speakers » How many of you have "Soular Energy"? Hands?

Home » Sponsored » Pi Speakers » How many of you have "Soular Energy"? Hands?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

be george, he's got it! [message #39871 is a reply to message #39867]

Mon, 13 January 2003 04:50

Sam P.
Messages: 307
Registered: May 2009

Grand Master

Ron,
Good call on the crossover still seeing about the same load, even with the higher driver impedance. Are you using a R2 of 16ohms, and R1 of 25ohms, a la 12dB Pi Pad? Then substituting the higher z driver will likely reduce the attenuation present by maybe(?) 1.5dB's...you could probably "correct" for the difference by increasing R1 to 30 ohms. Otherwise, your HF MAY be a little hot. Sam

Report message to a moderator

[Message index]

		How many of you have "Soular Energy"? Hands? By: BillEpstein on Sun, 12 January 2003 17:36
		Gee, Bill, I didn't use the right pillows! By: spkrman57 on Sun, 12 January 2003 18:06
		Re: Gee, Bill, I didn't use the right pillows! By: bmar on Sun, 12 January 2003 18:23
		be george, he's got it! By: Sam P. on Mon, 13 January 2003 04:50
		Sam, horn is a little hot, but in step with Altec sound! By: spkrman57 on Mon, 13 January 2003 13:01
		Re: How many of you have "Soular Energy"? Hands? By: bmar on Sun, 12 January 2003 18:18
		I have just one word for you, Bill....... By: BillEpstein on Sun, 12 January 2003 18:31

Previous Topic:	2Pi Speakers
Next Topic:	Woofer-tweeter

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Jul 13 10:38:45 CDT 2024