AudioRoundTable.com: Pi Speakers » Let's try those 2Pi Towere pictures again.

Home » Sponsored » Pi Speakers » Let's try those 2Pi Towere pictures again.

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Thanks [message #39823 is a reply to message #39821]

Fri, 10 January 2003 10:12

wasteh202
Messages: 137
Registered: May 2009

Master

Yes , the towers are braced well. Kind of built like a tank actually. But, like Wayne says you can't bract too much.

These things weigh about 52lbs each. If I make them from MDF I would not be able to move them very easy. I used 3/4 inch maple plywood.

The parts Wayne sent me have the coil (0.5mH) included and alrady in line, so I am using it but I don't have anything to compare it to since this is all I know.

Report message to a moderator

[Message index]

		Let's try those 2Pi Towere pictures again. By: wasteh202 on Fri, 10 January 2003 06:16
		pic 230 By: Sam P. on Fri, 10 January 2003 06:23
		Re: pic 230 By: wasteh202 on Fri, 10 January 2003 06:29
		Re: Let's try those 2Pi Towere pictures again. By: Bugman on Fri, 10 January 2003 06:26
		Re: Let's try those 2Pi Towere pictures again. By: wasteh202 on Fri, 10 January 2003 06:30
		Nice job of bracing By: JLapaire on Fri, 10 January 2003 08:46
		Thanks By: wasteh202 on Fri, 10 January 2003 10:12
		Super! By: Wayne Parham on Fri, 10 January 2003 10:30
		Re: Super! By: Erik Johansson on Fri, 10 January 2003 10:43
		Bracing and cabinent volume By: wasteh202 on Fri, 10 January 2003 11:05
		Internal displacement By: Wayne Parham on Fri, 10 January 2003 13:06
		Re: Internal displacement By: Erik Johansson on Fri, 10 January 2003 13:15
		Re: Internal displacement By: Wayne Parham on Fri, 10 January 2003 13:30
		Re: Internal displacement By: wasteh202 on Fri, 10 January 2003 13:37
		Re: Internal displacement By: Erik Johansson on Fri, 10 January 2003 13:51
		Re: Internal displacement By: wasteh202 on Fri, 10 January 2003 15:52
		KSN-1038 By: Erik Johansson on Fri, 10 January 2003 13:42
		Bass'n treble By: mollecon on Fri, 10 January 2003 17:11
		Looks great and beefy too! By: ToFo on Fri, 10 January 2003 21:55
		Dimensions: Narrower front baffle By: Oscarl on Mon, 13 January 2003 22:24
		Re: Dimensions: Narrower front baffle By: wasteh202 on Tue, 14 January 2003 06:23
		Re: Dimensions: Narrower front baffle By: ozzi on Wed, 15 January 2003 02:47

Previous Topic:	Woofer-tweeter
Next Topic:	Active filters

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Aug 11 08:03:28 CDT 2024