AudioRoundTable.com: Pi Speakers » Theater 4 passively biamped

Home » Sponsored » Pi Speakers » Theater 4 passively biamped

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Can you send me your schematic you are using?? [message #39751 is a reply to message #39730]

Mon, 06 January 2003 06:29

spkrman57
Messages: 522
Registered: May 2009

Illuminati (1st Degree)

G,
I would like to passively crossover between the preamp and amps like you have described. If you can send me the scheatic with the crossover points (I am guessing 1.6khz) I would appreciate. I think if you could post the schematic to the Pi forum, there are many others who would do the same. I would be using Dynaco SCA-35 and ST-70 for mine, but crossover at 800hz using Altec horns and drivers. I will take the signal from the volume control in the SCA-35 (it is integrated amp) and custom rewire for preamp out and power amp inputs. Thanks for posting this, I have been waiting for a post like this one.
Regards, Ron

Report message to a moderator

[Message index]

		Theater 4 passively biamped By: Garland on Sun, 05 January 2003 12:48
		Re: Theater 4 passively biamped By: BillEpstein on Sun, 05 January 2003 14:34
		Re: Theater 4 passively biamped By: wasteh202 on Sun, 05 January 2003 14:50
		Re: Theater 4 passively biamped By: Garland on Mon, 06 January 2003 09:01
		Re: Still unpacking boxes from the move By: BillEpstein on Mon, 06 January 2003 15:01
		Re: Theater 4 passively biamped By: Garland on Mon, 06 January 2003 15:20
		Re: Theater 4 passively biamped By: wasteh202 on Sun, 05 January 2003 14:40
		Re: Theater 4 passively biamped By: Garland on Mon, 06 January 2003 08:44
		Re: Excellent By: bmar on Sun, 05 January 2003 18:23
		Can you send me your schematic you are using?? By: spkrman57 on Mon, 06 January 2003 06:29
		Re: Can you send me your schematic you are using?? By: Garland on Mon, 06 January 2003 08:30
		Re: Can you send me your schematic you are using?? By: spkrman57 on Mon, 06 January 2003 08:37
		Re: Theater 4 passively biamped By: DRC on Mon, 06 January 2003 07:12
		Yes, but there was actual progress on you cabinets today!(nt) By: Garland on Mon, 06 January 2003 15:22
		Ooh! Ooh! Tell me more! By: DRC on Mon, 06 January 2003 17:41

Previous Topic:	New Participant
Next Topic:	FRIED TWEETER!!!!!!!!!!!!! OUCH!!!!!!!!!!! Need help with tweeter protector!!!!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Aug 11 15:58:49 CDT 2024