AudioRoundTable.com: Pi Speakers » Impeadance of Pi speakers using 1.6khz crossover

Home » Sponsored » Pi Speakers » Impeadance of Pi speakers using 1.6khz crossover

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Impedance of Pi speakers using 1.6khz crossover [message #39304 is a reply to message #39297]

Sun, 01 December 2002 10:40

Wayne Parham
Messages: 18791
Registered: January 2001

Illuminati (33rd Degree)

You're right that I was thinking of the JBL 2226H when I mentioned 8 ohms impedance through the midrange. That's the part I normally use, so that's what I was thinking about when I made my reply. Since you're running a JBL 2226J, your impedance averages 16 ohms.

Report message to a moderator

[Message index]

		Impeadance of Pi speakers using 1.6khz crossover By: spkrman57 on Fri, 29 November 2002 07:07
		Re: Impedance of Pi speakers using 1.6khz crossover By: Wayne Parham on Fri, 29 November 2002 23:00
		Re: Impedance of Pi speakers using 1.6khz crossover By: spkrman57 on Sun, 01 December 2002 04:21
		Re: Impedance of Pi speakers using 1.6khz crossover By: Wayne Parham on Sun, 01 December 2002 10:40
		as measured my quasi-4 Pi hf z By: Sam P. on Sun, 01 December 2002 11:18
		Re: as measured my quasi-4 Pi hf z By: Wayne Parham on Sun, 01 December 2002 13:36

Previous Topic:	2Pi -3dB points revisited...
Next Topic:	FS/FT JBL Professional Series Woofers

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 30 17:04:09 CST 2024