AudioRoundTable.com: Pi Speakers » Gettin' down to Crossover Cases

Home » Sponsored » Pi Speakers » Gettin' down to Crossover Cases

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Gettin' down to Crossover Cases [message #38890 is a reply to message #38889]

Wed, 30 October 2002 19:03

bmar
Messages: 346
Registered: May 2009

Grand Master

I'm in agreemant with Wayne. I cross my system just a little higher. 400 and 1900. Thats the range though. 300-500; 1.6k-2k
active you can dial it in nice. passive will cost a fortune for a 3way everytime you want to try something new. I would still say that even if ultimately you want a passive, you should start out with an active if you have the amps. this will get you reall close to the final passive components you will need.

Bill

Report message to a moderator

[Message index]

		Gettin' down to Crossover Cases By: DRC on Wed, 30 October 2002 13:37
		Maybe you might try posting this over on the Hi E forum as well!(nt) By: Garland on Wed, 30 October 2002 15:09
		Re: Gettin' down to Crossover Cases By: Wayne Parham on Wed, 30 October 2002 16:45
		Re: Gettin' down to Crossover Cases By: bmar on Wed, 30 October 2002 19:03
		Re: Gettin' down to Crossover Cases By: Garland on Thu, 31 October 2002 03:59

Previous Topic:	Height for the Pi 4
Next Topic:	size, shipping, and pricing

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Sep 01 23:17:48 CDT 2024