AudioRoundTable.com: Pi Speakers » Gettin' down to Crossover Cases

Home » Sponsored » Pi Speakers » Gettin' down to Crossover Cases

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Gettin' down to Crossover Cases [message #38889 is a reply to message #38886]

Wed, 30 October 2002 16:45

Wayne Parham
Messages: 18756
Registered: January 2001

Illuminati (33rd Degree)

I recommend 300Hz and 1.6Khz crossover points, and use the π crossover configuration for the tweeter, exactly as on the two-way units. For the 300Hz point, the components used in a passive unit get a bit large, so it might be better to go active. But if you also want the option of using a single amp - and so need a passive unit - I have some suitable units being built right now, so let me know if you're interested. That way, you'll have the option of using the speakers either multi-amped or with a single amp.

Report message to a moderator

[Message index]

		Gettin' down to Crossover Cases By: DRC on Wed, 30 October 2002 13:37
		Maybe you might try posting this over on the Hi E forum as well!(nt) By: Garland on Wed, 30 October 2002 15:09
		Re: Gettin' down to Crossover Cases By: Wayne Parham on Wed, 30 October 2002 16:45
		Re: Gettin' down to Crossover Cases By: bmar on Wed, 30 October 2002 19:03
		Re: Gettin' down to Crossover Cases By: Garland on Thu, 31 October 2002 03:59

Previous Topic:	Height for the Pi 4
Next Topic:	size, shipping, and pricing

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Sep 01 23:13:53 CDT 2024