Home » Sponsored » Pi Speakers » Driver Escalation
Re: Cabinet considerations for TAD 1602's [message #38810 is a reply to message #38809] Thu, 24 October 2002 11:12 Go to previous messageGo to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18756
Registered: January 2001
Illuminati (33rd Degree)
A good enclosure size for the TAD 1602's is 30" x 20" x 14.5", using 1" stock and a rectangular port that's 3.1" x 5.5" and 4.4" long. That would look very good with Bill's horns too. You could reduce the width to 17" and increase the depth and/or height a little too, if desired, matching the width of the cabinet to the width of the horn.
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: here's a party few are sure to attend..........
Next Topic: Wayne, how cool it is! (a 1 Pi story)
Goto Forum:
  


Current Time: Sun Sep 01 23:16:55 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest