Home » Sponsored » Pi Speakers » Building 2pi Towers - COMPLETE!
Re: Building 2pi Towers - COMPLETE! [message #38694 is a reply to message #38691] Thu, 17 October 2002 12:20 Go to previous messageGo to previous message
Fresno is currently offline  Fresno
Messages: 41
Registered: May 2009
Baron
Yup, I did originally order the regulars, after I rec'd them I decided to go with towers. I tell ya Wayne, wire doesn't stretch very much!

I improvised converting them to towers, If I screwed up the phasing anywhere it would be in there.

When I first hooked them up I could hear the tweeters were out of phase (unfocussed image), so I went around back and fixed it. I'll have to see if when I switch them back the bass gets boosted, if so, then I'll need to open hopefully only one them up and check/fix.

Thanks for the input

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Horns Length, Frequency Wave Lengths, And, All That Good Stuff
Next Topic: How long would a 2-3/4" diameter port be for Studio 2pi?
Goto Forum:
  


Current Time: Wed Feb 19 22:11:26 CST 2025

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest