AudioRoundTable.com: Pi Speakers » Building 2 Pi Towers

Home » Sponsored » Pi Speakers » Building 2 Pi Towers - Part 1

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Let the saga continue..... [message #38542 is a reply to message #38539]

Wed, 02 October 2002 10:25

LuxmanLover
Messages: 164
Registered: May 2009

Master

your tale sounds like pretty much every project I've been involved with......lolololol....I'm laughing with you .....pesonally, with 20/20 hindsight guiding me, I would always recommend a router, 3/8" drill and a couple of 4" clamps as the basic starter tools for an aspiring speakerbuilder...but from the sounds of it you're finding your own way and theres nothin' wrong with that. And don't be afraid to ask for help here...there are several master woodworkers and plenty of backyard woodbutchers to give advise( it will be obvious which camp I'm in when I post picture of my soon to be finished 4Pi's, gulp).
Carry on and good luck!
Kelly

Report message to a moderator

[Message index]

		Building 2 Pi Towers - Part 1 By: Fresno on Wed, 02 October 2002 09:42
		Let the saga continue..... By: LuxmanLover on Wed, 02 October 2002 10:25
		speaking of saga................... By: replay on Wed, 02 October 2002 15:15
		Re: Building 2 Pi Towers - Part 1 By: BillEpstein on Wed, 02 October 2002 16:00
		Re: Building 2 Pi Towers - Part 1 By: Bugman on Wed, 02 October 2002 17:39
		Not Giving Up! By: Fresno on Wed, 02 October 2002 17:52
		Re: Not Giving Up! By: RJW on Sat, 05 October 2002 21:40
		Re: Building 2 Pi Towers - Part 1 By: RJW on Sun, 06 October 2002 19:09

Previous Topic:	One More Pro Series 7 Pi-18 Question
Next Topic:	Pi Studio Series: SET friendly?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Oct 05 06:18:18 CDT 2024