AudioRoundTable.com: Pi Speakers » 4-pi hig freqency response

Home » Sponsored » Pi Speakers » 4-pi hig freqency response

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Tweeter compensation cable assembly [message #38513 is a reply to message #38508]

Tue, 01 October 2002 07:17

JBLman
Messages: 12
Registered: May 2009

Chancellor

the two speakers are JBL 2226 and 2426. The crossover is of Eminence construction. I'm not sure if you modified it in any way. and I don't have the box (which is at home) so can't provide the nominclature written on the side. Included with the package are a cluster of six resistor blocks. I connected the blocks to the HF output of the crossover, the other end of the wire, of course, is connected to the HF driver. Does all sound right? Is that the correct crossover?

Report message to a moderator

[Message index]

		4-pi hig freqency response By: JBLman on Mon, 30 September 2002 14:35
		Tweeter compensation cable assembly By: Wayne Parham on Mon, 30 September 2002 15:01
		Re: Tweeter compensation cable assembly By: JBLman on Tue, 01 October 2002 07:17
		Re: Tweeter compensation cable assembly By: Wayne Parham on Tue, 01 October 2002 10:35
		bypass cap installed on your cable assemblies?(nt) By: Sam P. on Tue, 01 October 2002 13:50
		That's the most common cause of this symptom By: Wayne Parham on Tue, 01 October 2002 20:59

Previous Topic:	Downsizing Pi plans
Next Topic:	Re: Grill Cloth

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Nov 25 05:35:53 CST 2024