AudioRoundTable.com: Pi Speakers » Horn - install in cabinet or not?

Home » Sponsored » Pi Speakers » Horn - install in cabinet or not?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

you can try glueing [message #38199 is a reply to message #38197]

Thu, 05 September 2002 18:06

Sam P.
Messages: 307
Registered: May 2009

Grand Master

1x2's around the inside edge. I repaired an old AR2 speaker that way, for the same reason...the t-nuts were coming loose where the TOO THIN plywood edge crumbled. Alternative to flush mounting is build up the front baffle, cork panels work well, even another layer of brich ply or mdf, with holes to clear the woofer and horn flanges. Very strong. Sam

Report message to a moderator

[Message index]

		Horn - install in cabinet or not? By: laoye on Thu, 05 September 2002 15:21
		4Pi pro By: LuxmanLover on Thu, 05 September 2002 15:45
		Flush mount By: Wayne Parham on Thu, 05 September 2002 15:57
		One more thing...actually 2 By: LuxmanLover on Thu, 05 September 2002 16:23
		you can try glueing By: Sam P. on Thu, 05 September 2002 18:06
		I thought about.... By: LuxmanLover on Thu, 05 September 2002 19:52
		Re: Horn - install in cabinet or not? By: Wayne Parham on Thu, 05 September 2002 15:50

Previous Topic:	Sub-Woofer cabinet
Next Topic:	OT: How I Spent My Summer, by......

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Sep 27 04:54:44 CDT 2024