AudioRoundTable.com: Pi Speakers » frosting on the pi

Home » Sponsored » Pi Speakers » frosting on the pi

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

go with jbl's advice and [message #38173 is a reply to message #38172]

Wed, 04 September 2002 15:57

Sam P.
Messages: 307
Registered: May 2009

Grand Master

cross using a 12dB/octave filter. Remember, those tweets are described as "tight pattern control, deep penetration, and extremely high ON-AXIS sensitivity". Your upper freqs are going to be in a narrow 40 degree beam...is that OK in your listening situation? Might want to look for some 2404's (the baby cheek tweets) that are wider dispersion. A search at HUG for jbl 2402 will also turn up some suggestions from previous users, IIRC. Sam

Report message to a moderator

[Message index]

		frosting on the pi By: tdc on Wed, 04 September 2002 09:21
		Re: frosting on the pi By: Wayne Parham on Wed, 04 September 2002 12:31
		Re: frosting on the pi By: tdc on Wed, 04 September 2002 13:23
		Re: frosting on the pi By: Wayne Parham on Wed, 04 September 2002 15:25
		Re: frosting on the pi By: tdc on Wed, 04 September 2002 15:29
		go with jbl's advice and By: Sam P. on Wed, 04 September 2002 15:57
		Re: go with jbl's advice and By: tdc on Wed, 04 September 2002 16:10

Previous Topic:	physics of port tuning
Next Topic:	PSD 2.8 speaker

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 29 20:28:44 CST 2024