AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » 2 Pi Tower Plans

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Additional 3/4" MDF question [message #37975 is a reply to message #37969]

Thu, 22 August 2002 10:15

Matts
Messages: 359
Registered: May 2009

Grand Master

would the design still be ok if you made it out of 3/4 in. MDF with 48" H.,16" width, and 12" depth? Do the multiples of 4" create a standing wave problem? In rough cubic feet (not allowing for the thicker wood) it's 66.44 as designed and 64.0 as above. Purpose of change would be to get 4 sides that could be built easily with the pre-made 3/4" MDF shelves (which come in 12 and 16" sizes). If it might sound worse, no big deal to do the woodwork...

Report message to a moderator

[Message index]

		2 Pi Tower Plans By: JohnB on Thu, 22 August 2002 03:40
		You've got mail! By: Wayne Parham on Thu, 22 August 2002 03:44
		Re: 2 Pi Tower Plans By: Edwin on Thu, 22 August 2002 07:07
		Additional 3/4" MDF question By: Matts on Thu, 22 August 2002 10:15
		Additional 3/4" MDF answer By: Wayne Parham on Thu, 22 August 2002 14:23
		Re: Corrected 3/4" MDF calculations By: Matts on Thu, 22 August 2002 15:02
		Re: Additional 3/4" MDF answer By: JLM on Mon, 09 September 2002 12:40

Previous Topic:	tall Studio 2 ???
Next Topic:	I'm not gonna be able to fit into my helmet

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 29 07:22:03 CST 2024