AudioRoundTable.com: Pi Speakers » 2nd ordrer Butterworth vs 3rd order Butterworth

Home » Sponsored » Pi Speakers » 2nd ordrer Butterworth vs 3rd order Butterworth

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: only UNCUT 511B's ring [message #37929 is a reply to message #37927]

Wed, 21 August 2002 10:25

spkrman57
Messages: 522
Registered: May 2009

Illuminati (1st Degree)

Sam,
I had noticed after posting about the 3 db loss compared to the 2226H. Yes, you are correct, but this situation will be using a 16ohm horn driver also, so ref wattage will be same, 97db and 115db. Since this product when completed if it works as well as I hope for will be run off P-P tube amp (maybe my Mc240 at 40 watts/chnl on 16 ohm tap. As a bonus, using 16 ohm drivers can use 18 guage wire with less signal loss. Regards, Ron

Report message to a moderator

[Message index]

		2nd ordrer Butterworth vs 3rd order Butterworth By: spkrman57 on Tue, 20 August 2002 06:22
		Re: 2nd ordrer Butterworth vs 3rd order Butterworth By: Wayne Parham on Tue, 20 August 2002 14:32
		Re: 2nd ordrer Butterworth vs 3rd order Butterworth By: spkrman57 on Wed, 21 August 2002 06:43
		only UNCUT 511B's ring By: Sam P. on Wed, 21 August 2002 08:22
		Re: only UNCUT 511B's ring By: spkrman57 on Wed, 21 August 2002 10:16
		Re: only UNCUT 511B's ring By: spkrman57 on Wed, 21 August 2002 10:25
		Re: 2nd ordrer Butterworth vs 3rd order Butterworth By: Wayne Parham on Wed, 21 August 2002 11:33

Previous Topic:	2 Pi Piezo Tweeter Choices
Next Topic:	eminence psd-2002 vs selenium d300ti

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Dec 02 18:14:58 CST 2024